Lenmar Megavar Conversion Undercoater 1G
ALLOW 5 TO 7 DAYS FOR THIS PRODUCT TO SHIP.
Lenmar’s 1S.750NF, MegaVarTM Catalyzed White Undercoater, is designed for the professional woodworker who demands maximum performance in a solid pigmented finish. Once catalyzed, this fast drying, VOC & HAPS compliant undercoater offers superior protection against moisture and household chemicals. The high solids formula builds to a beautiful and exceptionally durable film once cured. This conversion undercoater requires the addition of 4 ounces 1A.622B, Catalyst (3%) per gallon). Addition of 1A.406 solvent reducer may be required for some spray equipment and to extend pot-life. Add the catalyst and solvent slowly, while stirring. Only catalyze enough product that can be applied in a 6-8 hour period. The high solid content makes it possible to achieve a desired end result with just a few coats. Lenmar’s MegaVar Pigmented system will pass KCMA requirements in two coats (one coat of 1S.750NF catalyzed undercoater and one coat of 1S.75xNF series pigmented topcoat).
BENEFITS:
- VOC & HAPS COMPLIANT
- HIGH SOLIDS CONTENT
- MEETS OR EXCEEDS KCMA REQUIREMENTS
- PASSES AWI OP-5 REQUIREMENTS
- RESISTS MOISTURE & CHEMICALS
- TINTABLE WITH INDUSTRIAL COLORANTS
- 8-12 HOUR POT LIFE
RECOMMENDED USES:
- OFFICE FURNITURE
- KITCHEN CABINETS
- BATHROOM VANITIES
- COMMERCIAL CABINETS
- DISPLAYS & FIXTURES
CHARACTERISTICS:
Weight Per Gallon: 10.3 lbs.
% Weight Solids: 60
% Volume Solids: 40
Viscosity # 5 Zahn: 26 -- 32 seconds
VOC: Does not exceed 470 g/l
or 3.9 lb./gal.
HAPS: < 0.06 lb. of HAPS Per lb. of Solids
COLOR: White
DRY TIMES: Sand: 30 – 45 min.
Recoat: 45 – 60 min.
CLEAN UP: 1A.406 Thinner/1A.101 Acetone